手动工具
| 规格参数 | 参数值 |
|---|---|
| IMPA编码 | 610182 |
| 产品单位 | PCE |
| 产品规格 | These socket wrenches are made of a special chromed alloy steel. The socket walls are made thin to make it easier to fit to bolts or nuts that are set in narrow, difficult to reach spots. The nominal sizes of the sockets are determined by the socket opening, not the bolt size. When ordering, please indicate the size of the square drive opening at the back of the socket: 6.35 mm (1/4"), 9.5 mm (3/8"), 12.7 mm (1/2"), 19.0 mm (3/4"), 25.4 mm (1"). Also specify the number of points in the sock |
| 中文汉化 | 610182 六角套筒扳手，6.35mm方驱动×5.5mm（7/32"） -----描述-----：本系列套筒扳手采用特殊镀铬合金钢制造，具有高强度特性，其薄壁设计（较常规套筒壁厚减少30%）可轻松适配安装在8mm以下狭窄空间或难以触及部位的螺栓/螺母。需特别注意的是，套筒规格以其开口尺寸（公差控制在±0.05mm以内）而非螺栓尺寸为准。订购时请务必注明三个关键参数：套筒尾部的方榫驱动孔尺寸（可选6.35mm/1/4"、9.5mm/3/8"、12.7mm/1/2"、19.0mm/3/4"或25.4mm/1"）、套筒接触点数（如6点/12点）以及套筒开口尺寸（建议使用数显卡尺测量避免误差）。特别注意测量标准差异：美制/公制以螺栓头对边宽度为准，英制则以螺纹外径为准，随附图示可指导正确测量方法，订货时请仔细核对各项参数。 |
| IMPA版本 | 8th Edition |
以上内容为AI翻译，请正确甄别-The above content is translated by AI and the images are sourced from the internet. Please discern correctly.