安全设备
| 规格参数 | 参数值 |
|---|---|
| IMPA编码 | 332130 |
| 产品单位 | NRL |
| 产品规格 | Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm |
| 中文汉化 | 332130 胶带 管道 #2130 ISO 14726 & BS1710 流向箭头 50MMX30M -----描述-----：管道应在每个房间内至少标注一次，并在每个舱壁和甲板的穿透点处、靠近每个阀门的位置以及沿管道长度方向每隔3至5米进行标注。由于管道弯曲或不同用途的管道间距较近等局部条件，可能需要增加标注位置。在粘贴前，管道表面应无灰尘和油污。胶带在管道“盲侧”的重叠部分应至少为20毫米，但对于外周长大于200毫米的管道，胶带只需覆盖其半圈即可。 |
| IMPA版本 | 8th Edition |
以上内容为AI翻译，请正确甄别-The above content is translated by AI and the images are sourced from the internet. Please discern correctly.